Wiring survey
We trace and test circuits across the house to identify cable type, condition and any unsafe splices or connections.
Permits pulled and inspections booked on every install · (000) 000-0000
Whole-Home Rewiring
Outdated wiring replaced in planned stages, so the house stays livable and every new circuit is grounded and protected.
Get a rewiring plan — (000) 000-0000
Two-prong outlets throughout the house, cloth-covered cable in the attic, aluminum branch circuits or a remodel that uncovered splices nobody can explain: these are the usual reasons people call about a rewire. Insurers and buyers' inspectors flag them too.
Electrician Hunts Point is licensed, bonded and insured in Washington, and a rewire is where that matters most. We open the panel, sample circuits in several rooms and map what is there before we suggest anything. Sometimes a full rewire is the honest answer; sometimes replacing the worst circuits and adding grounding and protection where it counts is enough. Either way, you get a staged plan with a written price.
A complete replacement, done in stages you can live through.
We trace and test circuits across the house to identify cable type, condition and any unsafe splices or connections.
The house is divided into zones so power is off in only one area at a time and you can stay in the home.
Modern copper cable with a ground conductor replaces the old runs, fished through walls wherever possible.
Circuits get the protection the current code requires for each room, at the breaker or the receptacle.
Receptacles, switches and boxes are replaced with grounded, properly secured devices.
We cut small, deliberate access holes and leave them clean for patching, rather than opening whole walls.
We confirm the panel can take the new circuits and recommend an upgrade only if it genuinely cannot.
The rewire is permitted and inspected, and you get an updated, readable panel directory at the end.
We spend a few hours testing circuits and looking in the attic and crawlspace. You get a written plan that explains what must change, what could wait and what each stage costs.
We work one area at a time, restoring power to each zone at the end of the day wherever possible. A typical house takes one to two weeks depending on access.
After the inspector signs off, we walk you through the new panel layout and point out where wall patches will need finishing.
The electrician leading your rewire brings ten years of hands-on electrical experience to the planning and the work.
Staging the work keeps most rooms powered most of the time.
If a partial rewire solves the problem, we will tell you before you commit to a full one.
Book a free visit and we will test what is behind the walls. You will get a clear, staged plan and a price before any work starts.
Book a wiring survey — (000) 000-0000